The Long Term Rental program is for customers who wish to rent a table for a minimum of 3 months. Price starts at $4500 for 3 month period with shipping included, then $700 per month thereafter.
The long term rental program consists of the fixture package as shown, but the table is a simplified table that will require assembly. Customer can choose the leg configuration they wish to rent.
x4
x4
x8
x16
x8
x10
x16
x16
x10
x8
x6
x22
x8
x10
x30
x8
x4
x4
x4
x4
x4
x4
x20
x20
x8
x1
The Fireball Cast Iron Tables are the best all around tables on the market. They combine the strength of 1” thick top and sides used for heavy duty tables with the more finely spaced 2” grid pattern you find on light to medium duty tables. Gray cast iron naturally resists weld spatter, does not form burrs on the surface, resists deformation, and once machined flat, it stays flat.
Combined with the patent pending Fireball 3/4" Fixture System, Fireball tables and fixtures are the fastest, simplest, and most secure fixture system.
FA75-TCG102
G2 Version Of fireball tabletops have a varierty of new updates.
Grid with Alpha numeric labeling.
2"x2" Grid
Clamping a Full 48" x 96" Table with Room to Spare
The Fireball 4.5’ x 8.5’ is our take on a 4’x8’ table. We believe that you need a table that can accommodate 4’x8’ parts, so we made it a little larger. At 102” long and 54” wide, the extra 6 inches along the length and width of the table makes it closer to a 5’x10’, giving you more space to work with.
The Fireball 4.5’ x 8.5’ table has 20% more top surface area than an actual 48" x 96" table. The spacing of the holes means you can fixture a 4’x8’ workpiece from all four sides without even bringing the table’s side apron into play.
Fireball’s new Dragon Scale coating provides the corrosion resistance of our previous black oxide finish with the added benefit of enhanced spatter resistance.
It’s spatter resistance needs to be seen to believed; it out performs even the best weld spatter sprays without the use of any sprays.
The Fireball Tool fixture system is superior to others on the market. It features blocks that can be used in many different ways to maximize their usage. It also can be incrementally adjusted to ensure maximum coverage as efficiently as possible while others fail to reach certain distances without a complicated fixture.
No other system on the market combines both the strength of 2"x1" fixture profiles with the versatility of 1" hole centers. This let's you place fixtures with the agility of a thinner table using 5/8" and 16mm holes, but with the strength of a big table using 28mm holes.
Other systems use a two hole slot as standard, which doesn't allow both adjustability and keeping things square. Fireball's tooth block, which forms the basis of most accessories spans 3 holes, which allows adjustment while always keeping your fixtures square with the table.
1” thick Gray Cast Iron on top and 1” thick sides, additional reinforcement ribs underneath. Machined flat on all 5 sides to within +/- 0.0025” per 24” x 24” area. Side apron on the tables are 8” tall with 3 rows of holes.
Legs mount onto plates at the bottom of the table. Leveling feet with spindles at the bottom of the legs offer fine adjustment and leveling.
Leg Height: 26"
Table Surface Height: 34"
Leveling Pad: +/- 1"
Static Load Capacity: 2,000 lb
Weight: 30.8 lb
Leg Height: 24" - 38"
Table Surface Height: 32" - 46"
Leveling Pad: +/- 1"
Static Load Capacity: 2,000 lb
Weight: 40.7 lb
Leg Height: 22" - 30
Table Surface Height: 30" - 38"
Leveling Pad: +/- 1"
Static Load Capacity: 1,700 lb
Weight: 36.3 lb
Leg Height: 27"
Table Surface Height: 35"
Leveling Pad: +/- 1"
Grid Pattern: 2"
Static Load Capacity: 2,000 lb
Weight: 130 lb
Producing large castings with perfect surfaces is a difficult task. The larger the surface area, the more likely there is to be some air pockets or voids during the casting process that only show up after machining.
Our castings are optimized to produce a high quality top surface, but even a typical table will often have some small imperfections on the top or side of the machined surfaces.
When the tables experience a higher number or severity of surface defects we designate them as factory seconds and sell them at a discounted price.
Customers who order factory seconds will receive photographs of the table before shipping.
