- TCX series combines a rigid, single piece cast frame with nitrided, tool steel plate.
- Top plates use P20 tool steel that is nitrided, which means a hard core material with extra hardened surface (over HRC 50).
- Top plates contain set screws for dialing in an extremely flat top surface.
Other Systems
More Stuff
Tabletop Dimensions
122" x 60" (10.16' x 5')
Table Side Height
8"
Table Thickness
1"
Hole Diameter
3/4"
Grid Pattern
2"
Top Plate Material
P20 Tool Steel
Finish
Nitrided
Frame Material
Gray Cast Iron
Frame Finish
Dragon Scale
Table Top Weight
2,650 lb
Shipping Weight
2,800 lb Shipping Weight
Leg Type
Heavy Duty
Number of Legs
x6
Capacity Per Leg
1,500 lbs
Rated Weight Capacity with Legs
6,500 lbs
Fixed Height
Leg Height: 26"
Table Surface Height: 34"
Leveling Pad: +/- 1"
Static Load Capacity: 2,000 lb
Weight: 30.8 lb
Adjustable Height
Leg Height: 24" - 38"
Table Surface Height: 32" - 46"
Leveling Pad: +/- 1"
Static Load Capacity: 2,000 lb
Weight: 40.7 lb
Adjustable Height + Caster
Leg Height: 22" - 30
Table Surface Height: 30" - 35"
Leveling Pad: +/- 1"
Static Load Capacity: 1,700 lb
Weight: 36.3 lb
Cast Tower Leg Block
Leg Height: 27"
Table Surface Height: 35"
Leveling Pad: +/- 1"
Grid Pattern: 2"
Static Load Capacity: 2,000 lb
Weight: 130 lb
What makes the 3/4" Hole System Superior to 16mm and 5/8"
45% larger hole cross section while still allowing 2” spacing on table and 1” spacing on accessories.
3/4" System
5/8" & 16mm System
What makes the 3/4” Hole System Superior to 28mm
2” hole spacing on tables vs 4” hole spacing.
- 92% more holes
3/4" System
25 Holes Per 12"x12" Section
28mm System
13 Holes Per 12"x12" Section
What Is Dragon Scale Coating?
Superior Anti-Spatter Properties
Improved Corrosion Resistance
Enhanced Wear Resistance
Steel vs Dragon Scale Coating
Nitride vs Dragon Scale Coating
Full Video (Dragon Scale Demo)
Why We Chose Gray Cast Iron?
It Is A Dimensionally Stable Material
Naturally Spatter Resistant
Allows Single Piece Pouring for Ultimate Rigidity & Flatness.
Unique Features of the Fireball Fixture System
The Fireball 3/4 fixture system uses the same fixtures for all tables. So whether you are starting with a mobile 1/2" thick plate or a truck sized heavy duty table, all fixtures work on both tables.
Fireball Fixtures Combine strength of 28mm fixtures with hole spacing of ⅝” or 16mm fixtures.
Simple and fast fence blocks.
Precise and fast tooth block system.
Modular Block Systems.
Unique and versatile clamps.
Heavy Duty and Light Duty tables use the same fixtures and backward compatible (compare to ⅝ and 16mm, and 28mm)
Explaining FA75 Fixture System
- The entire Fireball Table system is based on 3/4” diameter hole sizes on a 2” grid pattern.
- All fixtures are also based on a 3/4” diameter hole size and use 1” thick by 2” wide fixtures.
- Tables and plates come in different thicknesses for different applications and price points, but ALL Fireball 3/4” fixtures are compatible with ALL Fireball 3/4” tables whether it’s a 3500 lb heavy duty table or a portable 50 lb plate.
Why 3/4” Hole System
- 45% larger cross section compared to ⅝” and 16mm holes means strong bolts, stronger clamp.
- Largest hole size while still having a 2” grid pattern on the table and 1” hole pattern on fixtures.
Why 2” Grid Pattern
- The 2” grid pattern is the ideal hole density to get clamps and fixtures where you need them.
- Many fixtures require 2 bolts to properly align them. Having a 2” grid pattern allows shorter, more compact fixtures compared to 4” hole spacing. This is even more important when fixtures have slots to bridge the gap to the next hole, and is the difference between a 4” on a 2” grid, vs an 8” slot on a 4” grid.
Table Series Comparison
Features
| Feature | X-Frame | Heavy Duty | Standard Duty | Dragon Wagon | Pro Line |
| Plate Thickness | 1" | 1" | 1/2" | 1/2" | 1/2" |
| Sidewall Height | 8" | 8" | 6" | 4" | None |
Available Sizes
| Nominal Size (ft) | Dimensions (inch) | X-Frame | Heavy Duty | Standard Duty | Dragon Wagon | Pro Line |
| 13 x 6.5 | 156 x 78 | |||||
| 10 x 5 | 122 x 60 | |||||
| 6.5 x 6.5 | 78 x 78 | |||||
| 8.5 x 4.5 | 102 x 54 | |||||
| 6.5 x 4.5 | 78 x 54 | |||||
| 4.5 x 4.5 | 54 x 54 | |||||
| 6 x 3 | 72 x 36 | |||||
| 4.5 x 2.5 | 54 x 30 | |||||
| 3 x 3 | 36 x 36 | |||||
| 3 x 2 | 36 x 24 | |||||
| 2 x 1.5 | 24 x 20 |
Choosing The Table That’s Right For You
The Fireball 3/4 fixture system uses the same fixtures for all tables. So whether you are starting with a mobile 1/2" thick plate or a truck sized heavy duty table, all fixtures work on both tables.
X Frame
X Frame tables feature a rigid cast iron base with a nitrided, 1" thick tool steel plate on the top surface for added wear resistance.
- Tool Steel Plates that can be reversed or replaced
- Each plate features leveling screws to dial in flatness
- P20 Tool Steel with Nitride Finish for HRC50 hardness provides extra wear resistance
- Railroad Track style ribbing for extra rigidity
Heavy Duty
Heavy Duty Series Tables feature single piece, cast iron construction for best rigidity and flatness with 1" thick top and sides.
- Machined from single piece casting, 1” Thick Top and Sides
- Our most rigid table series
Standard Duty
Same construction method as heavy duty series, but with 1/2" thick top and sides.
- Machined from single piece casting. Holes machined to ½” thickness, with extra material and thickness on the underside
- Railroad track style ribbing for extra rigidity
Pro Line
Ultimate work station solution that keeps everything organized.
- Machined from single piece casting. Holes machined to ½” thickness, with extra material and thickness on the underside
- Reinforced railroad track style ribbing on perimeter for extra rigidity
Specifications
| X-Frame | Heavy Duty Series | Standard Duty Series | Dragon Wagon Series | Pro Table Kits | 24x12 Plate | Drill Press Plate | 14" Dia. PlatePlate | |
Hole Size | 3/4" | 3/4" | 3/4" | 3/4" | 3/4" | 3/4" | 3/4" | 3/4" |
Grid Pattern | 2" x 2" | 2" x 2" | 2" x 2" | 2" x 2" | 2" x 2" | 2" x 2" | 2" x 2"+ Extra Offset 2"x2" Tapped 1/2-13 | 2" x 2"+ Extra 2"x2" Offset Pattern |
Plate Thickness | 1" | 1" | 1/2" | 1/2" | 1/2" | 3/4" | 5/8" | 5/8" |
Set Screw Leveling | | | ||||||
Flatness | (+/-) 0.035" | (+/-) 0.005"Entire Table | (+/-) 0.005"Entire Table | (+/-) 0.005"Entire Table | (+/-) 0.005" (With Leveling)Entire Plate | (+/-) 0.005"Entire Plate | (+/-) 0.010"Entire Plate | (+/-) 0.007"Entire Table |
Sidewall Height | 8" | 8" | 6" | 4" | ||||
Material | P20 Tool Steel (Top Plate)Cast Iron (Frame) | Cast Iron | Cast Iron | Cast Iron | Steel | Cast Iron | Steel | Steel |
Finish | Nitride (Top Plate)Dragon Scale (Frame) | Dragon Scale | Dragon Scale | Dragon Scale | Dragon Scale | Dragon Scale | Nitride | Dragon Scale |
Grid Lines | Yes | Yes | Yes | Yes | No | No | No | No |
Coordinate System | Yes | Yes | Yes | Yes | No | No | No | No |
Legs | Heavy Duty | Heavy Duty | Standard Duty | Standard Duty | Angle Iron | |||
Tacking Bolt Spacer Size | 1/2" | 1/2" | 1/2" | 1/4" | 3/8" | 3/8" |