Our tacking bolts are what “holds” the parts in place when creating a fixture, but instead of having to grind away a weld, you just need to twist the head in order to loosen.

These tacking bolts are designed to hold two 1” thick parts together, like a 1” thick table and a 1” thick fixture.

Knurled 1-1/8" diameter by 5/8" height knob offers easy hand adjustment, with the option to use 5/16 hex drive.

These spacers are designed when you have table system with 3/4" diameter holes, but the thickness of the table is less than 1". Tacking bolts are designed to clamp 1" thick fireball blocks + 1" thick tables. Thinner tables will require a spacer for the tacking bolts to work properly.

For Dragon Wagon series tables, the tables are 1/2" thick, so we recommended use of a 1/2" thick spacers on each tacking bolt.

If you have a table that is 5/8" thick recommend the 3/8" thick spacer.
If you have a table that is 3/4" thick recommend the 1/4" thick spacer.

Multiple spacers can be used together. Spacers contain an internal o-ring to keep them them in place when mounted on tacking bolts.