Name: Replacement Pad for CNF008 and CNF012
Brand: Fireball Tool
SKU: FA75-CNF-PAD
Price: 9.50 USD
Availability: OutOfStock

Roll over image to zoom in Click on image to zoom

Quick Clamp Replacement Pad

Worn or lost pad? Swap the pad and keep the clamp. Fits the 8" and 12" Quick Clamp.

8" + 12"Quick Clamps

1.57"Wide

0.83"Tall

GroovedFace

Fits these clamps

One pad fits both sizes of the 3/4" Quick Clamp.

FA75-CNF008

Quick Clamp 8"

Capacity: 8"
Throat: 4.75"
Pressure: 1,000 lb

See the Quick Clamp →

FA75-CNF012

Quick Clamp 12"

Capacity: 12"
Throat: 4.75"
Pressure: 1,000 lb

See the Quick Clamp →

Pad only. The clamp is not included.

Up close

The same pad that comes on a new Quick Clamp.

Replacement pad on the end of a Quick Clamp screw — On the clamp screw

Close-up of the grooved pad face — Grooved face

Pad clamping the edge of a square tube on a welding table — Clamping a tube edge

How to use

Removing the old pad

Pull straight down to pop the pad off the spindle.

Installing the new pad

Place the spindle end into the pocket, then lightly tap the top of the spindle to push it into the pad.

Replacement pad drawing: 1.57 inch wide, 0.83 inch tall

Specs

Width1.57"
Height0.83"
FaceGrooved
FitsQuick Clamp 8" (FA75-CNF008) and 12" (FA75-CNF012)
Part no.FA75-CNF-PAD

In the box

1Replacement pad

Quick answers

Which clamps does it fit?

The 3/4" Quick Clamp, both the 8" (FA75-CNF008) and the 12" (FA75-CNF012).

Does it come with a clamp?

No, this is the pad only. Get the clamp on the Quick Clamp page.

Do I need a new clamp if my pad wears out?

No. Replace the pad and keep using your clamp.

Replacement Pad for CNF008 and CNF012