Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Clamp Starter - 3/4" System
Roll over image to zoom in Click on image to zoom
Clamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" SystemClamp Starter - 3/4" System

Clamp Starter - 3/4" System

Fireball ToolSKU: FA75-CLS-BDK
Price:
$288 USD
3/4" table system

Clamp Starter

Eight clamps for a 3/4" table: hold parts down, push them tight and lock them fast.

8Clamps
3Clamp types
3/4"Table holes
1,000 lbQuick Clamp pressure
6"Bulldog reach

What's in the set

Three clamp types, two of each. The Quick Clamp comes in two sizes.

Quick Clamp 12 inch, 3/4 inch system
12"
Quick Clamp 8 inch, 3/4 inch system
8"
The hold-down

Quick Clamp

Type
Screw clamp, 8" + 12"
Reach
4.75" throat
Pressure
1,000 lb
Pieces
4 (two of each size)
Best for
Holding parts down
  • Clamps on top or sides
  • 8" and 12" capacity
  • Fits 3/4" holes
Full Quick Clamp listing →
Side Push Clamp, 3/4 inch system
3/4" system
The pusher

Side Push Clamp

Type
Side push, 2 spindles
Reach
2.1"+ stroke per spindle
Spindles
2 heights, angled down
Pieces
2
Best for
Pushing parts tight
  • Downward angle stops part lift
  • Clamp two parts at once
  • Spindle pulls off if in the way
Full Side Push listing →
Auto Locking Bulldog Plier 11 inch, 3/4 inch system
11"
The fast one

Auto Locking Bulldog

Type
Auto-locking plier, 11"
Reach
6"
Pressure
0–300 lb
Pieces
2
Best for
Mixed thicknesses
  • Auto-locks, no adjusting
  • Swivel base hits any spot
  • 4.25" vertical capacity
Full Bulldog listing →

One job, three clamps

How the set holds a part for welding.

Quick Clamp holding a steel beam down on a fixture tableQuick Clamp

Hold it down

Quick Clamp pins the part with 1,000 lb.

Hand tightening a Side Push Clamp against a steel frame on a fixture tableSide Push

Push it tight

Side Push presses the part against your stops.

Auto Locking Bulldog holding a tube on a riser blockBulldog

Lock it fast

Bulldog auto-locks on thick or thin parts.

Quick Clamp clamping from the side of a fixture tableQuick Clamp

Use the sides

Quick Clamps work on the table's sides too.

Quick Clamp holding a steel beam down on a fixture tableQuick Clamp
Hand tightening a Side Push Clamp against a steel frame on a fixture tableSide Push
Auto Locking Bulldog holding a tube on a riser blockBulldog
Quick Clamp clamping from the side of a fixture tableQuick Clamp

One job, three clamps

How the set holds a part for welding.

  1. 1

    Hold it down

    Quick Clamp pins the part with 1,000 lb.

  2. 2

    Push it tight

    Side Push presses the part against your stops.

  3. 3

    Lock it fast

    Bulldog auto-locks on thick or thin parts.

  4. 4

    Use the sides

    Quick Clamps work on the table's sides too.

Quick Clamps holding a post and tube on a 3/4 inch fixture table

Made for 3/4" tables

Every clamp in the set fits 3/4" table holes.

  • Quick Clamp, 3/4" system
  • Side Push, 3/4" system
  • Bulldog, 3/4" version

Not sure which table you have? →

Quick Clamps and stops holding a flat bar on a fixture table

Reach the part

Set up anywhere on the table.

  • Bulldog swivel base hits any spot
  • Side Push stroke + 2" hole spacing always reaches
  • Quick Clamp reach is limited on its own (see add-on)

In the box

  • 2Quick Clamp, 12" (3/4" system)
  • 2Quick Clamp, 8" (3/4" system)
  • 2Side Push Clamp (3/4" system)
  • 2Auto Locking Bulldog Plier, 11" (3/4" system)
Optional add-on · Sold separately

Fence Pin Block 4"x1"x1"

Not included in this set. Use it as a swivel base so a Quick Clamp can reach more of the table.

Shop the fence pin block → Quick Clamp swiveling on a 4 x 1 x 1 inch Fence Pin Block to reach more of the table

Quick answers

Will these fit my table?

They're for tables with 3/4" holes. Check your table system if you're not sure.

Do I need to adjust the Bulldog for each part?

No. It auto-locks on thick or thin parts. A screw in the body sets the pressure.

Can the Side Push hold two parts?

Yes. Use both spindles at the same time.

You may also like

Recently viewed